INNOVATIVE TECH

LONGEVITY

EXPERT ADVICE

250 FR11 I-Joist Repair Flange Reinforcer

250 FR11 I-Joist Flange Reinforcers™ are designed to repair a notch cut from the top or bottom flange portion of a 11-7/8″ tall I-Joist with a 2.5″ flange.

from

$154.95

Quantity

Call a product advisor on

Easy to Install

Great for Existing Notches

Bolsters I-Joist Strength

Top or Bottom Notches

The Metwood 250 FR11 I-Joist Flange Reinforcer™

250 FR11 I-Joist Flange Reinforcers™ are designed to repair a notch cut from the top or bottom flange portion of a 11-7/8″ tall I-Joist with a 2.5″ flange.

The I-Joist Flange Reinforcers™ are engineered light gauge steel attachments for engineered I-Joists allowing larger openings in floor joists. The Metwood patented and engineered I-Joist Flange Reinforcer™ simplifies the routing and installation of utilities while repairing and restoring the strength of floor joists weakened by the placement of large holes or notch cut-outs.

Our Metwood Joist Reinforcers™ are shipped with the screws and drill bit needed for easy installation and are simply screwed to the side of the floor joist with no glue needed.

The 250 FR11 I-Joist Flange Reinforcers™ are designed to repair a notch cut from the top or bottom flange portion of an I-Joist that measure 2.5″. If using the 250 series on a flange larger or smaller than that of 2.5″, the web area or the flange area may need to be padded out so the 250 series Joist Flange Reinforcer™ fits tight against the joist.

If you have notch cuts in I-joists for plumbing or if you need to route plumbing through your floor joists, the Metwood 250 FR11 I-Joist Flange Reinforcer™ is the answer.

Metwood 250 FR11 I-Joist Flange Reinforcer™ is a Patented, Engineered, and Tested product!

Check out our product brochure and installation instructions below to see how easy installation is with the 250 FR11 I-Joist Flange Reinforcer by Metwood Building Solutions or you can check out our 250 FR214 I-Joist Repair Flange Reinforcer™ for notch repair on 14 inch I-joists, our 250 FR216 I-Joist Repair Flange Reinforcer™ for notch repair on 16 inch I-joists, or our 250 WR I-Joist Repair Web Reinforcer™ for openings in the web portion of an I-joist.

Features

Drill Bit and Screws Included!

Engineered Repair

No Glue Needed

Tech Spec

Patented
YES!
Engineered & Tested
YES!
Weight
8 lbs
Dimensions
24 x 12 x 1 in

Applications

250 FR11 I-Joist Flange Reinforcers are designed to repair a notch cut from the top or bottom flange portion of a 11-7/8″ tall I-Joist with a 2.5″ flange.

Call a product advisor

We had a tricky situation with a plumbing run that was solved using the 250 FR11 I-Joist Flange Reinforcer. The joist was easily repaired and even seems to be stronger than it was before!

FAQs

Some of your questions answered.

You can check out our I-Joist Repair Flange Reinforcer 250 FR14 for notch repair on 14 inch I-joists, our I-Joist Repair Flange Reinforcer 250 FR16 for notch repair on 16 inch I-joists, or our I-Joist Repair Web Reinforcer 250 WR for openings in the web portion of an I-joist.

Our 250 FR11 I-Joist Flange Reinforcers are 24 inches wide.

Feel free to call a product specialist at (540) 334-4294 and we can talk through your application to see if we can help or offer a different product to solve your I-Joist repair needs.

Other products

Rendering of a the Metwood 2810HR joist Repair Reinforcer applied to a HVAC hole in a wood joist.
The Metwood 2810HR™ Joist Repair Reinforcer allows the placement of a 6” diameter hole in a 2×10 or 2×12 wood joist and a 4” diameter hole in a 2×8.

from

$54.95
Add to cart
Rendering of the Metwood 210NR Joist Notch Repair Reinforcer applied to a notch for a PVC plumbing pipe.
The 210NR joist Repair Notch Reinforcer™ allows you to repair a 5″ wide by 3″ deep notch cut into a 2×10 joist, it does not require glue, and all fasteners are included.

from

$54.95
Add to cart
Rendering of the Metwood 250 FR14 I-Joist Flange Reinforcer applied to an I-joist notch for a PVC plumbing pipe.
250 FR14 I-Joist Flange Reinforcers™ are designed to repair a notch cut from the top or bottom flange portion of a 14 inch tall I-Joist with a 2.5″ flange.

from

$154.95
Add to cart

Metwood is a proud member of the following building associations where we actively advocate for the building industry:

Talk to a
product advisor

or call us at

I-joist Flange Reinforcer

Talk to a Product Advisor

Send your details so one of our knowledgeable product advisors can call you back shortly.